Hewlett Packard Enterprise OfficeConnect 1420 24G 2SFP Unmanaged L2 Gigabit Ethernet (10/100/1000) 1U Grey
This product has been discontinued.
The HPE OfficeConnect 1420 Switch Series delivers cost effective gigabit Ethernet (1GbE) connectivity offering small businesses 10 times the performance of Fast Ethernet with unmanaged plug-and-play simplicity. The series includes nine models, all with gigabit performance and a choice of key features including PoE+ for powering IP devices, Fiber and 10G uplinks for connectivity to servers and storage. All models support silent fanless operation, automated features for hands off operation and low power consumption. Features Cost-effective, High-performance GbE Layer 2 Switching – The HPE OfficeConnect 1420 Switch Series features gigabit Ethernet (1GbE) connectivity offering small businesses 10 times the performance of Fast Ethernet with unmanaged plug-and-play simplicity. – Unmanaged switches offer a cost-effective small business solution for locations needing only basic Layer 2 switching in a flat single tier network. – Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port. Flexible Choices To Meet Most Basic Layer 2 Networking Design Needs – The HPE OfficeConnect 1420 Switch Series includes nine models, all with gigabit performance and a choice of key features including PoE+, Fiber and 10G uplink options. – The 1420-24G-2SFP model with SFP uplinks is ideal where gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10GbE is needed. – Power over Ethernet (PoE+) models deliver greater efficiency for powering IP phones, wireless access points, or video surveillance cameras without the cost of additional cabling. – All HPE OfficeConnect 1420 Switch Series models are fanless for silent operation in office settings and include internal power supplies. – Units can be deployed for desktop operation or can be rack mounted. Automated Features for Hands-off Operation – All HPE OfficeConnect 1420 Switch Series models are plug-and-play with zero configuration and no required ongoing administration. – This unmanaged PoE+ model delivers fully automated support for powering compatible IP phones, video surveillance cameras or wireless access points. – The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10GbE transceivers to achieve 10GbE speeds. Alternatively, use today with gigabit SFP transceivers if higher performance is merely a future requirement. – IEEE 802.1p prioritization and other QoS features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities. – The OfficeConnect 1420 Switch Series supports jumbo packets to improve the performance of large data transfers. Cost-effective Ownership for Now and into the Future – The HPE OfficeConnect 1420 Switch Series offers a cost-effective upgrade path to next-generation 10GbE networks to reduce performance bottlenecks – The switch series includes PoE+ options to power IP devices without the cost of additional cabling for power. – Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, and power savings on short distance cables for low power consumption. – This series comes with a Limited Lifetime Warranty providing next business day advance hardware replacement shipment in most countries, 24×7 phone support available for the first 90 days, and electronic and business hours phone support for the entire warranty period.
- Technical Data
Ports & interfaces Copper ethernet cabling technology 10BASE-T,100BASE-TX,1000BASE-T SFP module slots quantity 2 Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 0.5 MB Stackable Yes Flash memory 1 MB Technical details Form factor 1U Product colour Grey Stackable Yes Rack mounting Yes Management features Switch type Unmanaged Quality of Service (QoS) support Yes Switch layer L2 Network Copper ethernet cabling technology 10BASE-T,100BASE-TX,1000BASE-T Networking standards IEEE 802.3,IEEE 802.3ab,IEEE 802.3u Full duplex Yes Auto MDI/MDI-X Yes 10G support No Data transmission Throughput 38.7 Mpps Latency (10-100 Mbps) 8 µs Latency (1 Gbps) 16 µs Packet buffer memory 0.5 MB MAC address table 8192 entries Switching capacity 52 Gbit/s Memory Packet buffer memory 0.5 MB Flash memory 1 MB Design Form factor 1U Product colour Grey Stackable Yes Rack mounting Yes Power Power supply included Yes AC input voltage 100 – 240 V AC input frequency 50 – 60 Hz Power consumption (typical) 18 W Power over Ethernet (PoE) Power over Ethernet (PoE) No Operational conditions Storage temperature (T-T) -40 – 70 °C Storage relative humidity (H-H) 5 – 95% Operating temperature (T-T) 0 – 40 °C Operating relative humidity (H-H) 5 – 95% Weight & dimensions Width 440 mm Depth 173 mm Height 44 mm Weight 2.2 kg
- Reviews (0)
Shown below is a small selection of some of our customers we have helped through understanding clients’ challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options that compliments their requirements.